Please be advised that this website is optimised for modern browsers. Consider upgrading your version of Internet Explorer.


VDSL2 Ethernet Extender

vdsl-extender

VE700 VDSL2 Ethernet Extender

The Allied Data Technologies  ADT-VE700 VDSL2 Ethernet Extender solution enables to extend ethernet networking to areas where ethernet cabling is almost impossible.

It’s ideally suitable to be part of the infrastructures of Rail-ways, High-ways, Large plants, Kiosks, SCADA, Traffic control systems, Video Surveillance or hospitality applications which require long distance cabling, which is not easy for Ethernet deployment.


  • The Allied Data Technologies ADT-VE700 solution enables to extend ethernet networking to areas where ethernet cabling is almost impossible.

    It’s ideally suitable to be part of the infrastructures of Rail-ways, High-ways, Large plants, Kiosks, SCADA, Traffic control systems, Video Surveillance or hospitality applications which require long distance cabling, which is not easy for Ethernet deployment.

    • VDSL2 line compliant with ITU-T G.993.2, Profiles: 17a and 30a
    • Supports remote PoE up to 30W compliant with IEEE 802.3at through line powering from Extender-CO
    • Fan-less temperature hardened design
    • Twisted pair and coaxial cable (BNC) wiring options for VDSL
    • Local power or PoE for the Extender CPE
    • Optional PoE support on Extender CO
    • IP switch configurable power and operation modes both on CPE and CO
    • DIN-rail and wall mount options
    • OLR (On Line Reconfiguration), UB0 Supported
  • Interfaces
    Compliant with VDSL2 Standard, ITU-T G.993.2
    VDSL2 Profiles: 17a and 30a
    Upstream/Downstream connection rates 100/100Mbps
    OLR (On Line Reconfiguration), UB0 Supported
    Fixed rate and rate adaptive
    Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X)
    IEEE 802.3at PoE (PSE)

    Performance
    > 100Mbps @24AGW 300M
    > 20Mbps @24AGW 1100M
    PoE budget: 30W @24AGW 500M or coaxial cable 1000M

    Networking protocol
    IPv4/IPv6, VLAN, IGMP Transparent bridging
    Ethernet over VDSL (EoVDSL) Bridging
    IEEE 802.3/3u compliant

    Extender-CO
    AC power adaptor (100~240VAC, 50~60Hz)
    Loop Power to Extender-CPE
    Operation Temperature: 0 ~ 50˚C
    IP30 indoor

    Extender-CPE
    Operation Temperature:
    indoor 0~65°C; outdoor -40~75°C
    IP67 outdoor

    Networking speed
    VDSL2 interface: Upstream/Downstream
    connection rates 100/100Mbps
    4-port 10/100Mbps Ethernet
    auto-crossover (MDI / MDI-X)

    Regulatory
    CE Mark EN60950 / EN55022
    UL 60950 / UL 508
    FCC Part 15 Class B

    Product sheet